This is a list of each component I will be using to complete the build of my hexacopter over the coming weeks. I will be making custom circular polarized antennas for FPV with a GoPro HD Hero and 5.8gHz transmitter and receiver. As much as I would love to equip the board with an OpenPilot CC Board, they are all currently out of stock.
EDIT: GoodLuckBuy began selling the Crius Multiwii board, the board that I will now be using in place of an openpilot. It is less expensive and includes additional sensors that the OpenPilot CC does not include.
Wiring:[Qty. 1 each] 5mm Heatshrink Tubing [Red] [Black] [Qty. 2] 3.5mm Bullet Connectors [Qty. 1] XT60 Connectors [Qty. 2] Futaba Terminal Connectors [Qty. 2] 20cm Servo Leads [Qty. 2 each] 16 AWG Wire [Red] [Black]
Electronics:[Qty. 1] Red LED Strip [Qty. 6] Red Brick 25A ESC [Qty. 6] 1200kV 150W Brushless Motor [Qty. 1] 5000mAh 3S 20C LiPo or 3300mAh 3S 40C LiPo (8:15 of flight time with LEDs on) [Qty. 1] MWC Crius SE Flight Controller [Qty. 1] Fly Sky TH-9X [Qty. 1] Bluetooth Telemetry Module
Frame:[Qty. 1] 3/8″ x 24″ Bass Wood Arms [Qty. 1] xRotor Spider HexFrame or Xaircraft Hexa or (custom frame) [Qty. 6] M3 Nuts [Qty. 3] M3 20mm Socket Head Bolts [Qty. 3] M3 14mm Socket Head Bolts [Qty. 2 each] 9x5x3 Props [Standard] [Counter-Rotating] (8 Props Total)
FPV Gear:[Qty. 1] G-OSD II (Can be flashed with CL-OSD) [Qty. 1] 5.8 GHz 200mW TX/RX [Qty. 1] GoPro HD Helmet Hero [Qty. 1] 4.3″ TFT LCD
Antenna:[Qty. 1] 14ft 18 Gauge Copper Wire [Qty. 1] 12″ SMA Connector
or[Qty. 1] 5.8 GHz Patch Antenna
Hobbyking Buddy Codes: http://hk.rc-international.info/swarm
Hobbypartz – 10% Off Radio Gear – Coupon Code: HPZTX10