Xaircraft X4 Drone Bill of Materials

This is the bill of materials for my Xaircraft Carbon Fiber X4 drone. I plan to use higher performance components than my previous builds with the addition of a budget autopilot system.

The above model for the Xaircraft X4 frame with Avroto motors can be found here.

[Qty. 1] Xaircraft X4 Carbon Fiber DIY Frame

[Qty. 1] APC220 478MHz Communications Module

[Qty. 1] 100A Power Distribution Board

[Qty. 1] JST Cables

[Qty. 4] Avroto 2814 Short Shaft 350W 770kV Brushless Motor

[Qty. 2] 10×4.5 Pair of Carbon Reinforced Props [For lifting FPV gear I recommend 11″ props]

[Qty. 4] 30A Blue Series Brushless ESCs

[Qty. 1] Black Vortex Flight Controller

Download: Complete Bill of Materials

Additional information for this build:

Flashing the Flysky/Turnigy 9X with ER9X

Flashing 30A BlueSeries ESCs

X4 Drone Build Log